Table tops made of 25mm particle board. thick, finished in bilaminate (made with PEFC certification). Finish to choose from among all our designs.
Optionally they can be served in: .1 Safety glass 6 + 6mm. matte finish .2 Laminate finish on chipboard (HPL) .3 Phenolic (COMPACMEL) .4 Varnished natural wood veneer on chipboard.
2mm PVC / ABS straight edges. thick applied with hot melt glue (100% recyclable) with all rounded edges with radius 2mm.
The cover can have a cable gland hole with a decorative cover or a TOP ACCESS (metallic or plastic) located in the place indicated by the property and in the chosen finish.
Inverted U-shaped gantry legs, made of pickled and cold-rolled section steel profile 50x50x2mm square. and rectangular section of 50x25x2mm. for the horizontal part that joins the legs.
Incorporates two metal beams made of pickled and cold rolled section steel profile rectangular 40x30x1.5mm. anchored below the table and set back 150mm. from the envelope.
Optionally, the leg can be manufactured with its lower part closing the frame, with a section tube rectangular 50x25x2mm. all over their faces
Coating of the metallic parts in epoxy powder paint with 80 microns after phosphating. Antioxidant, guaranteeing 200 hours of salt spray. Characteristics: .1 Resistance to chemical agents for domestic use UNE 48027: 1980 5 (24H), 4 (72H). .2 Resistance to mechanical damage: UNE-EN ISO 2409: 2007 Classification: 0. .3 Drop of a mass: UNE ? EN ISO 6272?1: 2004, at 500 mm without cracking. .4 Resistance to humidity: UNE ? EN ISO 6270?1: 2002 without alteration. .5 Accelerated aging: UNE EN ISO 11507: 2007 24H loss of gloss ? Height adjustment (+/? 3cm.) By means of 50mm diameter PP levelers. and M10, black, with Non-slip soleta included in the legs. Table height 740mm.
Joining the deck to the structure by means of “metal to metal” joints